[Company Logo Image] Leaders in Cutting Technology

Dominator 430

 

Home
Up
No Dig Technology
Search
Feedback
 

                               Dominator® 430

Specifications

        The Dominator®430 lateral reinstatement cutter is one of the revolutionary cutter designs in our Dominator® series.  This cutter works in 6" to 24" relined pipe, with the capability of working in up to 30" pipe with an additional skid package.  The motors are isolated in their own water-tight chamber eliminating the problem and cost of water damaged motors.  The chamber's water-tight quality is due to the placement of a captured o-ring, and because the o-rings cannot drop out, this design also permits quick assembly and disassembly.  Further, the motor chamber is isolated from the feed and rotation mechanism for ease of assembly and disassembly.  This cutter's capability of being disassembled and reassembled in approximately 30 minutes is due to its revolutionary 8 moving parts design; there are no clutches, keyways, or set screws, rather the air solenoid is on your truck.  All of the gears and feed mechanisms are manufactured from temper hardened stainless steel and bronze.  The cutter is machined from a solid billet of stainless steel and has no outside air tube, but rather an insulated internal air channel.  The head design incorporates a pinionless, quick-change design, and only one adjustable gib to ensure reduced adjustment time and maintain the highest degree of accuracy.  The cutter can be wired for 4, 5, or 6 wires to accommodate most of our competitors' systems.

        The 430 is 33 inches long with the ram in and 40.5 inches long with the ram out, weighs 72 pounds, and has a body diameter of 3.5 inches.  It has a ram travel of 4 to 6.5 inches.  It has 3 motors at 24-30 VDC.  It requires 24 volts of electricity to operate.  The cutter has an air requirement of 38 CFM @ 100 PSI.  The Dominator®430 operates with our Generation II Infinite Control 430 series control box and any of our air motors (depending on the line size you are working in).

Key Benefits

bullet

Works in 6 to 24 inch relined pipe (optional 24 to 30 inch configuration)

bullet

Limited Lifetime Warranty on rotation and feed mechanisms

bullet

Only 8 internal moving parts

bullet

Less than 30 minute tear down & reassembly    

See what you need?  Call us at 717-432-1403.                            Patent # 7,249,918

                                                                                                                                         Patent # 7,364,392

                                                                                                                                        Patent # 7,473,057

                                                                                                                                        Patent # 7,806,638


Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone

 

Home Up

Last modified: 02/15/12